NEUTRAL SWITCH INSPECTION [MZR-CD 2.2]

id0140f2800800

Note

•  Perform the following test only when directed.

Continuity Inspection

1.  Disconnect the negative battery cable.

2.  Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [A26M-R].)

3.  Inspect for continuity between the neutral switch terminals using an ohmmeter.

•  If not as specified, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [A26M-R].)

Specification

am6zzw00004027

am6zzw00004028