BRAKES TECHNICAL DATA
id045000800100
|
Item |
Specification |
|---|---|
|
Brake fluid type
|
European (L.H.D. U.K.) specs: SAE J1703, FMVSS 116 DOT-3 or DOT-4
Australian, General (L.H.D. R.H.D.) specs: SAE J1703, FMVSS 116 DOT-3
|
|
Brake pedal height (reference value)
|
L.H.D.: 170 mm {6.69 in}
R.H.D.: 181 mm {7.13 in}
|
|
Brake pedal play
|
4—8 mm {0.2—0.3 in}
|
|
Brake pedal-to-floor clearance (Brake pedal when depressed at 147 N {15.0 kgf, 33.0 lbf})
|
95 mm {3.7 in}
|
|
Vacuum pump vacuum specification (In 10 s) (MZR-CD 2.2)
|
Engine speed 725 rpm: 66.6 kPa {500 mmHg, 19.7 inHg} or more
|
|
Vacuum pump maximum vacuum (MZR-CD 2.2)
|
Engine speed 725 rpm: 93.3 kPa {700 mmHg, 27.6 inHg} or more
|
|
Front disc plate runout limit
|
0.05 mm {0.002 in}
|
|
Minimum front disc plate thickness
|
23 mm {0.91 in}
|
|
Minimum front disc plate thickness after machining using a brake lathe on-vehicle
|
23.8 mm {0.937 in}
|
|
Minimum front disc pad thickness
|
2.0 mm {0.08 in} min.
|
|
Rear disc plate runout limit
|
0.14 mm {0.0055 in}
|
|
Minimum rear disc plate thickness
|
8 mm {0.3 in}
|
|
Minimum rear disc plate thickness after machining using a brake lathe on-vehicle
|
8.8 mm {0.35 in}
|
|
Minimum rear disc pad thickness
|
2.0 mm {0.079 in} min.
|
|
Parking brake lever stroke when pulled at 98 N {10 kgf, 22 lbf}
|
1—3 notches
|
Standard power brake unit non-servo operation
|
Vacuum amount at 0 kPa {0 mmHg, 0 inHg} |
|
|---|---|
|
Pedal force |
Fluid pressure |
|
200 N {20.4 kgf, 45.0 lbf}
|
200 kPa {2.04 kgf/cm2, 29.0 psi} or more
|
Standard power brake unit servo operation
|
Vacuum amount at 66.7 kPa |
|
|---|---|
|
Pedal force |
Fluid pressure |
|
200 N {20.4 kgf, 45.0 lbf}
|
8,000 kPa {81.58 kgf/cm2, 1,160 psi} or more
|