PILOT BEARING INSPECTION [G35M-R]

id0510m1800200

1.  Refer to CLUTCH UNIT REMOVAL/INSTALLATION to remove the clutch unit until the pilot bearing is in a condition whereby it can be inspected. (See CLUTCH UNIT REMOVAL/INSTALLATION [G35M-R].)

2.  Without removing the pilot bearing, turn the bearing while applying force in the axial direction.

am6uuw00001247

•  If there is any malfunction, replace the pilot bearing. (See CLUTCH UNIT REMOVAL/INSTALLATION [G35M-R].)

3.  Install in the reverse order of removal.

4.  Add the specified amount of specified transaxle oil. (See TRANSAXLE OIL REPLACEMENT [G35M-R].)