CLUTCH COVER INSPECTION [G35M-R]

id0510m1800800

1. Refer to CLUTCH UNIT REMOVAL/INSTALLATION to remove the clutch cover. (See CLUTCH UNIT REMOVAL/INSTALLATION [G35M-R].)

2. Measure the wear of the diaphragm spring fingers.

am6zzw00007063

• If it exceeds the maximum specification, replace the clutch cover. (See CLUTCH UNIT REMOVAL/INSTALLATION [G35M-R].)

Clutch cover diaphragm spring fingers maximum depth

0.6 mm {0.02 in} max.

3. Measure the flatness of the pressure plate with a straight edge and a feeler gauge.

am6zzw00007064

• If it exceeds the maximum specification, replace the clutch cover. (See CLUTCH UNIT REMOVAL/INSTALLATION [G35M-R].)

Maximum clearance of flatness of the pressure plate

0.3 mm {0.01 in} max.

4. When checking the diaphragm spring fingers, mount a dial indicator on the cylinder block.

5. Rotate the flywheel and check for misaligned diaphragm spring fingers.

am6zzw00007065

• If it exceeds the maximum specification, replace the clutch cover. (See CLUTCH UNIT REMOVAL/INSTALLATION [G35M-R].)

Clutch cover diaphragm spring fingers maximum misalignment

1.0 mm {0.039 in} max.

6. Install in the reverse order of removal.

7. Add the specified amount of specified transaxle oil. (See TRANSAXLE OIL REPLACEMENT [G35M-R].)