NEUTRAL SWITCH REMOVAL/INSTALLATION [G35M-R]

id051501800700

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].)

2.  Remove the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].)

3.  Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

4.  Drain the oil from the transaxle. (See TRANSAXLE OIL REPLACEMENT [G35M-R].)

5.  Disconnect the neutral switch connector and remove the neutral switch.

am3uuw00002139

6.  Install the neutral switch (with a new gasket) to the transaxle case.

Tightening torque
20—29 N·m {2.1—2.9 kgf·m, 15—21 ft·lbf}

7.  Connect the neutral switch connector.

8.  Add the specified amount and type of oil. (See TRANSAXLE OIL REPLACEMENT [G35M-R].)

9.  Install the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

10.  Install the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].)

11.  Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.8, MZR 2.0, MZR 2.5].)