TRANSAXLE OIL INSPECTION [A26M-R]

id0515l1800000

1. Park the vehicle on level ground.

2. Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

3. Remove the oil level plug and washer.

am6zzw00007147

4. Verify that the oil is near the brim of the plug port.

• If the oil level is low, add the specified amount and type of oil through the filler plug hole.

Manual transaxle oil grade

API Service GL-4

Manual transaxle oil viscosity

SAE 75W-80

5. Tighten the oil level plug with a new washer.

Tightening torque

28—50 N·m {2.9—5.0 kgf·m, 21—36 ft·lbf}

6. Install the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)