DTC U0100:00

id060200812300

DTC
U0100:00
CAN system communication error
DETECTION CONDITION
•  Error detected in signal from PCM via CAN communication
POSSIBLE CAUSE
•  Signal error from PCM
•  Malfunction in CAN communication line between EPS control module and PCM


Diagnostic Procedure

•  Perform inspection according to the diagnostic procedure in BODY & ACCESSORIES. (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI))].) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR 2.0 DISI))].) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D. (MZR-CD 2.2))].) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (EXCEPT MZR-CD 2.2, MZR 2.0 DISI))].) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR 2.0 DISI))].) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D. (MZR-CD 2.2))].)