 |
am6zzw00006702
REFRIGERANT PRESSURE SWITCH REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER]
id0740a2802600
1. Disconnect the negative battery cable.
2. Discharge the refrigerant from the system. (See REFRIGERANT CHARGING.)
3. Grasp the piping block using pliers and remove the pressure switch using a spanner.
4. Remove in the order indicated in the table.
am6zzw00006702
|
|
1
|
Refrigerant pressure switch connector
|
|
2
|
Refrigerant pressure switch
|
5. Install in the reverse order of removal.
6. Perform the refrigerant system performance test. (See REFRIGERANT SYSTEM PERFORMANCE TEST.)
Refrigerant Pressure Switch Installation Note
1. Apply compressor oil to O-ring and connect the joint.