PASSENGER AIR BAG DEACTIVATION (PAD) SWITCH REMOVAL/INSTALLATION

id081000804100

1.  Disconnect the negative battery cable.

2.  Remove the PAD switch.

am6zzw00007376

3.  Disconnect the PAD switch connector.

4.  Install in the reverse order of removal.

5.  Switch the ignition to ON.

6.  Verify that the air bag system warning light illuminates for approx. 6 s and goes out.

•  If the air bag system warning light does not operate normally, refer to the on-board diagnostic system (air bag system) and perform inspection of the system. (See FLOWCHART.)