BUCKLE SWITCH INSPECTION


id081100803000


Driver Side


Vehicle with seat warmer (European (L.H.D.) specs.)/Vehicle with power seat (Except european (L.H.D.) specs.)

1.  Switch the ignition to off.

2.  Disconnect the negative battery cable.

3.  Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.)

4.  Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION.)

5.  Inspect for continuity between the buckle switch terminals using a tester.

am6zzw00007299

•  If not as indicated in the table, replace the front buckle.
am6zzw00007300


Vehicle without seat warmer (European (L.H.D.) specs.)/Vehicle without power seat (Except european (L.H.D.) specs.)

1.  Switch the ignition to off.

2.  Disconnect the negative battery cable.

3.  Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.)

4.  Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION.)

5.  Inspect for continuity between the buckle switch terminals using a tester.

am6zzw00007301

•  If not as indicated in the table, replace the front buckle.
am6zzw00001009


Passenger Side

1.  Switch the ignition to off.

2.  Disconnect the negative battery cable.

3.  Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.)

4.  Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION.)

5.  Inspect for continuity between the buckle switch terminals using a tester.

am6zzw00007299

•  If not as indicated in the table, replace the front buckle.
am6zzw00007300