No.4 ALL POWER WINDOWS OTHER THAN DRIVER'S SIDE DO NOT OPERATE USING THE POWER WINDOW MAIN SWITCH [POWER WINDOW SYSTEMS (WITHOUT EXTERIOR OPEN/CLOSE FUNCTION)]
id090396831300
|
4
|
All power windows other than driver’s side do not operate using the power window main switch
|
|
POSSIBLE CAUSE
|
• Open or short circuit in wiring harness between ignition switch (IG1) and power window main switch (IG1).(Without advanced keyless entry and push button start system)
• Open or short circuit in wiring harness between relay block and power window main switch. (With advanced keyless entry and push button start system)
• Power window main switch malfunction
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
• Turn the ignition switch to the ON position.
• Set the power cut-switch to the UNLOCK position.
• Operate all power windows other than the driver’s side using the power window main switch.
• Do any power windows operate?
|
Yes
|
Replace the power window main switch. (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION.)
|
|
No
|
Inspect for an open or short circuit in the power window main switch wiring harness (battery power supply).
Inspect the power window main switch connector connection. (damage/pulled-out pins, corrosion)
Repair or replace if necessary.
|
||