NO.2 CD PLAYER/CHANGER DOES NOT EJECT THE CD [CD PLAYER/CHANGER]

id0903e5826200

2

CD player/changer does not eject the CD

Possible DTC

With M-MDS

B1D19:79

Without M-MDS

Audio unit

•  10:Er01

•  22:Er01

Car-navigation unit

•  Device code 22/Error code 01

POSSIBLECAUSE

•  Defective CD. (e.g., cracked, badly bent, rough edges, scratch, dirty CD, condensation)

•  Non-conventional discs (e.g., 8 cm (3 in) CD, 8 cm (3 in) disc adapter, heart-shaped disc, octagonal disc)

•  Poor connection of audio unit connector or terminal (e.g., damaged, bent, pulled-out pin, corrosion)

•  Improper audio panel installation

•  Improper CD cover installation

•  Deformed disc is used (e.g., out of specification (thickness), bent disc).

•  Multiple CDs are inserted into the CD player at the same time

•  Audio unit malfunction (with audio system)

•  Car-navigation unit malfunction (with car-navigation system)

Note

•  The CD may be malfunctioning if the CD player/changer does not eject the certain CD only. Inspect the CD player/changer operation using the CD known to be good.

2	CD player/changer does not eject the CD
POSSIBLECAUSE	• Defective CD. (e.g., cracked, badly bent, rough edges, scratch, dirty CD, condensation) • Non-conventional discs (e.g., 8 cm (3 in) CD, 8 cm (3 in) disc adapter, heart-shaped disc, octagonal disc) • Poor connection of audio unit connector or terminal (e.g., damaged, bent, pulled-out pin, corrosion) • Improper audio panel installation • Improper CD cover installation • Deformed disc is used (e.g., out of specification (thickness), bent disc). • Multiple CDs are inserted into the CD player at the same time • Audio unit malfunction (with audio system) • Car-navigation unit malfunction (with car-navigation system) Note • The CD may be malfunctioning if the CD player/changer does not eject the certain CD only. Inspect the CD player/changer operation using the CD known to be good.

Diagnostic procedure

STEP	INSPECTION		ACTION
1	• Inspect the operation of the audio system other than CD player/changer (e.g. Radio). • Does other audio system operate?	Yes	Go to Step 3.
1		No	Go to the next step.
2	• Switch the ignition to off. • Inspect the connection of the audio unit/car-navigation unit connector (24-pin). • Inspect both audio unit/car-navigation unit connector and wiring harness-side connector for poor connection. (such as damaged/bent/pulled-out pins, corrosion) • All the pins and connector normal?	Yes	Go to the next step.
2		No	If the audio unit/car-navigation unit connector/pin is wrong: • Replace the audio unit (with audio system). (See: AUDIO UNIT REMOVAL/INSTALLATION.) • Replace the car-navigation unit (with car-navigation system). (See: CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.) If the wiring harness-side connector/pin is wrong: • Repair or replace the pins and/or the connector.
3	• Eject the CD. • Is the CD ejected from the CD player/changer?	Yes	Go to the next step.
3		No	Inspect the audio panel and CD cover installation. Securely install the audio panel and/or CD cover as necessary.
4	• Insert the CD into the CD player/changer. • Does the CD insert into the CD player/changer smoothly?	Yes	Replace the audio unit (with audio system). (See: AUDIO UNIT REMOVAL/INSTALLATION.) Replace the car-navigation unit (with car-navigation system). (See: CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)
4		No	Install the audio panel and/or CD cover properly, then go to the next step.
5	• Is the CD ejected from the CD player/changer?	Yes	Troubleshooting completed. Explain repairs to the customers.
5	• Is the CD ejected from the CD player/changer?	No	Replace the audio unit (with audio system). (See: AUDIO UNIT REMOVAL/INSTALLATION.) Replace the car-navigation unit (with car-navigation system). (See: CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)

2	CD player/changer does not eject the CD
Possible DTC	With M-MDS	B1D19:79
Possible DTC	Without M-MDS	Audio unit • 10:Er01 • 22:Er01 Car-navigation unit • Device code 22/Error code 01
POSSIBLECAUSE	• Defective CD. (e.g., cracked, badly bent, rough edges, scratch, dirty CD, condensation) • Non-conventional discs (e.g., 8 cm (3 in) CD, 8 cm (3 in) disc adapter, heart-shaped disc, octagonal disc) • Poor connection of audio unit connector or terminal (e.g., damaged, bent, pulled-out pin, corrosion) • Improper audio panel installation • Improper CD cover installation • Deformed disc is used (e.g., out of specification (thickness), bent disc). • Multiple CDs are inserted into the CD player at the same time • Audio unit malfunction (with audio system) • Car-navigation unit malfunction (with car-navigation system) Note • The CD may be malfunctioning if the CD player/changer does not eject the certain CD only. Inspect the CD player/changer operation using the CD known to be good.