REAR POWER WINDOW MOTOR INSPECTION

id091200001900

Auto-open/close Function For All Windows

1.  Disconnect the negative battery cable.

2.  Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

3.  Disconnect the power window motor connector.

4.  Apply battery positive voltage and connect the ground to power window motor terminals E and F, and then inspect the power window motor operation.

am6zzw00006363

•  If the power window motor does not operate as indicated in the table, replace it.

Operation	Terminal
	F	E
Open	B+	Ground
Close	Ground	B+

5.  Connect the battery positive voltage to power window motor terminal D and connect terminal C to ground.

6.  Operate the power window motor and measure the voltage at terminals A and B.

•  If there is any malfunction, replace the power window motor.

Auto-open/close Function for Driver-side

1.  Disconnect the negative battery cable.

2.  Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

3.  Disconnect the power window motor connector.

4.  Apply battery positive voltage and connect the ground to power window motor terminals E and F, and then inspect the power window motor operation.

am6zzw00006364

•  If the power window motor does not operate as indicated in the table, replace it.

Operation	Terminal
	F	E
Open	B+	Ground
Close	Ground	B+