REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION
id091400430400
1. Fully open the rear door glass.
2. Disconnect the negative battery cable.
3. Remove the following parts:
- (1) Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)
- (2) Rear inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)
- (3) Rear door speaker (See REAR DOOR SPEAKER REMOVAL/INSTALLATION.)
- (4) Rear door quarter glass (See REAR DOOR QUARTER GLASS REMOVAL/INSTALLATION.)
- (5) Rear door glass (See REAR DOOR GLASS REMOVAL/INSTALLATION.)
- (6) Rear door module panel (See REAR DOOR MODULE PANEL REMOVAL/INSTALLATION.)
4. Remove the screw.
5. Remove the rear door latch and lock actuator.
6. Install in the reverse order of removal.