KEYLESS CONTROL MODULE CONFIGURATION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]

id0914004394z3

1.  Connect the M-MDS(IDS) to DLC-2.

am6zzw00000865

2.  After the vehicle is identified, select the following items from the initial screen of the IDS.

(1)  Select the “Module Programming”.

3.  Then, select items from the screen menu in the following order.

(1)  Select “Programmable Module Installation”.

(2)  Select “RKE”.

4.  Perform the configuration according to the directions on the screen.

5.  Verify that no DTCs are displayed.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection. (See DTC TABLE [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM].)