CUSTOMIZED FUNCTION SETTING PROCEDURE [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]

id0914004397z3

1.  Connect the M-MDS(IDS) to the DLC-2.

am6zzw00000906

2.  After the vehicle is identified, select the following items from the initial screen of the IDS.

(1)  Select “Module Programming”.

3.  Then, select items from the screen menu in the following order.

(1)  Select “Programmable Parameters”.
(2)  Select “RKE”.

4.  Select an item name, then select option.

M-MDS display

Function

Initial setting

Setting content

Control unit
Advanced keyless function
Advanced keyless entry and push button start system function can be set to inoperable.
Enabled
Disabled/ Enabled
Keyless control module
Prevention function of key Containment in Trunk or Liftgate
Key-left-in-trunk prevention function can be set.
Disabled
Disabled/ Enabled
Keyless control module
ACC auto off
The function to automatically switch off the ignition after one hour has elapsed since the ignition was switched to ACC can be set to operable or inoperable.
Enabled
Disabled/ Enabled
Keyless control module
Power off mode
The transition pattern in which the ignition position is switched by pressing the push button start can be selected.
Direct
Direct/Stepwise
Keyless control module
Advanced key battery low warning
Advanced key remaining battery level/battery dead warning can be set.
Enabled
Disabled/ Enabled
Keyless control module
Answer back buzzer volume
Volume adjustment of the answer back buzzer can be set.
European (L.H.D. U.K.) specs.
•  Disabled
Except above
•  5*1
Disabled/ 4-10
Keyless control module
Warning buzzer volume
Volume adjustment of the warning buzzer can be set.
8*2
5-10
Keyless control module
Auto lock
Auto lock function can be set.
Disabled
Disabled/Enabled
Keyless control module

*1  :Depending on the vehicle, the initial value of the answer back buzzer volume may be 4. if the answer back buzzer volume is reset to the initial value, set the value according to the table.
*2  :Depending on the vehicle, the initial value of the warning buzzer volume may be 10. if the warning buzzer volume is reset to the initial value, set the value according to the table.