HAZARD WARNING SWITCH INSPECTION

id091800803100

1.  Disconnect the negative battery cable.

2.  Remove the center panel upper. (See CENTER PANEL UPPER REMOVAL/INSTALLATION.)

3.  Remove the hazard warning switch. (See HAZARD WARNING SWITCH REMOVAL/INSTALLATION.)

4.  Verify that the continuity between the hazard switch terminals is as indicated in the table.

am6zzw00006261

am6zzw00006354

•  If not as indicated in the table, replace the hazard warning switch.

5.  Apply battery voltage to hazard switch terminal D, and connect terminal C to ground.

6.  Verify that the LED illuminates.

•  If there is any malfunction, replace the hazard warning switch.