CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE [European (L.H.D. U.K.) specs.]

id0940004398z2

1. Connect the M-MDS(IDS) to the DLC-2.

am6xuw00000638

2. After the vehicle is identified, select "Module Programming" from the initial screen of the IDS.

3. Select "Programmable Module Installation", then select "BCM/GEM" from the screen menu.

4. Select an item name, then select option.

M-MDS display

Function

Initial setting

Setting content

Control unit

Smart turn

The ‘turn light system’ function can be set.

Enabled

Disabled / Enabled

BCM

Auto Wiper Request

Auto wiper system can be set to operable or inoperable.

Enabled

Disabled^* / Enabled

BCM

M-MDS display	Function	Initial setting	Setting content	Control unit
Smart turn	The ‘turn light system’ function can be set.	Enabled	Disabled / Enabled	BCM
Auto Wiper Request	Auto wiper system can be set to operable or inoperable.	Enabled	Disabled^* / Enabled	BCM

* :The wiper specification has been changed to the standard type (INT). If changed, it is necessary to replace the wiper and washer switch with the standard type (INT).