BODY CONTROL MODULE (BCM) CONFIGURATION


id094000800900

1.  Connect the M-MDS(IDS) to the DLC-2.

am6zzw00001980

2.  After the vehicle is identified, select "Module Programming" from the initial screen of the IDS.

3.  Select "Programmable Module Installation", then select "BCM/GEM" from the screen menu.

4.  Perform the configuration according to the directions on the screen.

5.  Verify that no DTCs are displayed.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.