HYDRAULIC VARIABLE VALVE TIMING ACTUATOR INSPECTION


id011000126800

Caution
•  Do not disassemble the hydraulic variable valve timing actuator because it is a precision unit.

1.  Verify that the notch of the holder and notch of the cover on the hydraulic variable valve timing actuator are aligned and fitted.

bp26ze00000002

•  If the notch and notch are not aligned, rotate the holder (camshaft installation) until a click is heard and verify that they are aligned and fixed in place.
―  If the notch and notch are not aligned or the holder and cover are not secured even if their notch and notch are aligned, replace the hydraulic variable valve timing actuator.