NO.16 HIGH OIL CONSUMPTION/LEAKAGE [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)]


id0103q5802200

16

HIGH OIL CONSUMPTION/LEAKAGE

DESCRIPTION
•  Oil consumption is excessive.
POSSIBLE CAUSE
•  Improper oil level gauge
•  Improper engine oil viscosity
•  Oil leakage
•  PCV valve malfunction
•  Engine internal parts malfunction

Diagnostic Procedure

Step

Inspection

Results

Action

1
ADD ENGINE OIL
Note
•  Add engine oil to the MAX position because the validity of the engine oil consumption is determined.
•  Visually verify the engine oil level.
•  Is the engine oil level at the MAX position?
Yes
Go to the next step.
No
Add engine oil to the MAX position, then go to the next step.
2
DETERMINE IF ENGINE OIL CONSUMPTION IS REASONABLE
•  Record the current traveled distance.
•  Have the customer drive the vehicle 1,931 km {1,200 mile}.
•  Is the engine oil level appropriate?
Yes
Complete the symptom troubleshooting.(Explain to the customer that it is normal for the engine oil level to decrease from MAX to MIN after driving the vehicle 1,931 km {1,200 mile}.)
No
Go to the next step.
3
INSPECT ENGINE OIL VISCOSITY
•  Inspect the engine oil viscosity.
•  Is the engine oil viscosity appropriate?
Yes
Go to the next step.
No
Repair or replace the malfunctioning location, then go to Step 6.
4
INSPECT FOR ENGINE OIL LEAKAGE
•  Inspect for engine oil leakage from the outside of the engine.
•  Is there engine oil leakage?
Yes
Repair or replace the malfunctioning location, then go to Step 6.
No
Go to the next step.
5
DETERMINE IF MALFUNCTION CAUSE IS DUE TO PCV VALVE OR INTERNAL ENGINE MALFUNCTION
•  Is the PCV valve normal?
Yes
Inspect for internal engine wear, damage.
•  Cylinder
•  Piston ring
•  Intake/exhaust valve
•  Cylinder head gasket
―  If there is any malfunction:
•  Repair or replace the malfunctioning location, then go to the next step.
No
Replace the PCV valve, then go to the next step.
6
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
•  Has the malfunction symptom been eliminated?
Yes
Complete the symptom troubleshooting.(Explain repair contents to customer)
No
Repeat the inspection from Step 1.