NO.7 ENGINE OIL WARNING LIGHT ILLUMINATED/MESSAGE RELATED TO ENGINE HYDRAULIC PRESSURE MALFUNCTION INDICATED IN DISPLAY [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT CYLINDER DEACTIVATION)]

id0103q6876900

7

ENGINE OIL WARNING LIGHT ILLUMINATED/MESSAGE RELATED TO ENGINE HYDRAULIC PRESSURE MALFUNCTION INDICATED IN DISPLAY
DESCRIPTION
•  Engine oil warning light illuminated.
•  Master warning light illuminated.
•  Message related to engine hydraulic pressure malfunction indicated in display. (With center display)
POSSIBLE CAUSE
•  Engine oil leakage
•  Improper engine oil level
•  Instrument cluster malfunction
•  PCM malfunction
SYSTEM WIRING DIAGRAM
Not applicable

Diagnostic Procedure

STEP

INSPECTION

RESULTS

ACTION
1
INSPECT ENGINE OIL LEVEL
•  Inspect the engine oil level.
•  Is there any malfunction?
Yes
Inspect for engine oil leakage and repair or replace the malfunctioning location.
No
Go to the next step.
2
VERIFY DTC
•  Retrieve the PCM and instrument cluster DTCs using the M-MDS.
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [PCM (SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT CYLINDER DEACTIVATION))].)
(See DTC TABLE [INSTRUMENT CLUSTER].)
No
Go to the next step.
3
INSPECT INSTRUMENT CLUSTER
•  Inspect the instrument cluster.
•  Is there any malfunction?
Yes
Replace the instrument cluster, then go to the next step.
(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
No
Go to the next step.
4
Verify the test results.
•  If normal, return to the diagnostic index to service any additional symptoms.
•  If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis.
―  If the vehicle is repaired, troubleshooting is completed.
―  If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM.