ENGINE OIL DATA RESET [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT CYLINDER DEACTIVATION)]

id0140h4444700

Note

• If the engine oil was replaced with the engine oil maintenance monitor function ON, perform the engine oil data reset to reset the engine oil replacement period calculation data recorded in the PCM regardless of whether or not the wrench mark is illuminated.

• The ON/OFF condition of the engine oil maintenance function can be verified using the M-MDS.

Engine Oil Data Reset Procedure (Without Center Display)

Step

Inspection

Results

Action

Note

1

•  Using the M-MDS, verify the engine oil maintenance monitor function ON/OFF condition.

•  Is the engine oil maintenance monitor function on?

Yes

Go to the next step.

If the engine oil maintenance monitor function is on, it is necessary to perform the engine oil data reset.

No

The engine oil data reset is unnecessary.

2

•  Switch the ignition OFF (LOCK).

•  Press and hold the tripmeter switch with the ignition switched off, then switch the ignition ON (engine off).

―  Keep pressing the tripmeter switch for more than 5 s.

•  Does the master warning light flash for a few seconds?

Yes

Engine oil data reset is completed.

The master warning light flashes for a few seconds when the engine oil data reset procedure is completed.

No

Perform Step 2 again.

Step	Inspection	Results	Action	Note
1	• Using the M-MDS, verify the engine oil maintenance monitor function ON/OFF condition. • Is the engine oil maintenance monitor function on?	Yes	Go to the next step.	If the engine oil maintenance monitor function is on, it is necessary to perform the engine oil data reset.
No	The engine oil data reset is unnecessary.
2	• Switch the ignition OFF (LOCK). • Press and hold the tripmeter switch with the ignition switched off, then switch the ignition ON (engine off). ― Keep pressing the tripmeter switch for more than 5 s. • Does the master warning light flash for a few seconds?	Yes	Engine oil data reset is completed.	The master warning light flashes for a few seconds when the engine oil data reset procedure is completed.
No	Perform Step 2 again.

Engine Oil Data Reset Procedure (With Center Display)

Note

• If the engine oil maintenance monitor function is on, it is necessary to perform the engine oil data reset.

1. Using the M-MDS, verify the engine oil maintenance monitor function ON/OFF condition. Is the engine oil maintenance monitor function on?

• Yes

― Go to the next step.

• No

― The engine oil data reset is unnecessary.

2. Switch the ignition ON (engine off or on).

3. Select [Applications] on the center display.

4. Select [Vehicle Status Monitor] on the center display.

5. Select [Schedule Maintenance] on the center display.

6. Select [Oil Change] on the center display.

7. Select [Reset] on the center display.