NEUTRAL SWITCH INSPECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT CYLINDER DEACTIVATION)]

id0140h4800800


Neutral Switch No.1


Continuity inspection

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the neutral switch No.1. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [C66M-R].)

3.  Inspect for continuity between neutral switch No.1 terminal A and B.

ac5wzw00011268

•  If not as specified, replace the neutral switch No.1. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [C66M-R].)

Specification

Measured condition

Continuity
Rod pushed
Continuity detected
Rod not pushed
No continuity


Neutral Switch No.2


Continuity inspection

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the neutral switch No.2. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [C66M-R].)

3.  Inspect for continuity between neutral switch No.2 terminal B and C.

ac5wzw00011269

•  If not as specified, replace the neutral switch No.2. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [C66M-R].)

Specification

Measured condition

Continuity
Rod pushed
Continuity detected
Rod not pushed
No continuity