SUSPENSION TECHNICAL DATA

id025000800100

Front wheel alignment (Unloaded)*1

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Maximum steering angle
[Tolerance ±3°]
Inner
38°54′
Outer
32°06′
Total toe-in
Tire
[Tolerance ±4 {0.2}]
(mm {in})
2.0 {0.08}
Rim inner
[Tolerance ±3 {0.1}]
Vehicle equipped with 17 inch wheel: 1 {0.04}
Vehicle equipped with 19 inch wheel: 1 {0.04}
(degree)
0°10′±0°10′
Caster angle*2 (Reference value)
[Tolerance ±1°]
6°09′
6°12′
6°14′
6°16′
6°18′
Camber angle*2 (Reference value)
[Tolerance ±1°]
-0°15′
-0°16′
-0°16′
-0°17′
-0°17′
Steering axis inclination (Reference value)
15°08′
15°09′
15°09′
15°10′
15°10′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°30′.

Rear wheel alignment (Unloaded)*1

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Total toe-in
Tire
[Tolerance ±4 {0.2}]
(mm {in})
2.0 {0.08}
Rim inner
[Tolerance ±3 {0.1}]
Vehicle equipped with 17 inch wheel: 1 {0.04}
Vehicle equipped with 19 inch wheel: 1 {0.04}
(degree)
0°10′±0°10′
Camber angle*2 (Reference value)
[Tolerance ±1°]
-0°41′
-0°43′
-0°45′
-0°47′
-0°49′
Thrust angle (Reference value) [Tolerance ±0°48′]
-0°00′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°30′.

Standard tire and wheel

Item

Specification
Wheel
Size
17 × 7 1/2J
19 × 7 1/2J
Inset
(mm {in})
50 {2.0}
45 {1.8}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Material
Aluminum alloy
Tire
Size
225/55R17 97V
225/45R19 92W
Air pressure
(kPa {bar <psi>})
Front
Up to 3 persons
230 {2.3, <33>}
230 {2.3, <33>}
Full load
250 {2.5, <36>}
250 {2.5, <36>}
Rear
Up to 3 persons
230 {2.3, <33>}
230 {2.3, <33>}
Full load
320 {3.2, <46>}
320 {3.2, <46>}
Remaining tread
(mm {in})
1.6 {0.063} min.
Wheel and tire
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
108—147 {12—14, 80—108}
Wheel and tire runout
(mm {in})
Radial direction
1.5 {0.059} max.
Lateral direction
2.0 {0.079} max.
Wheel imbalance
(g {oz})
Adhesive-type*1*2:
13 {0.46} max.
Knock-type*3:
8 {0.3} max.
Adhesive-type*1*2:
12 {0.42} max.
Knock-type*3:
7 {0.2} max.

*1  :Do not install four or more weights. Do not affix the weights such that they are parallel to each other or overlapping. The total weight of all the weights is 160 g {5.64 oz} or less.
*2  :If a weight of 125 g {4.41 oz} is to be added, divide the weight into two and affix.
*3  :Do not install three or more weights. One weight is 60 g {2.1 oz} or less and two weights are 100 g {3.53 oz} or less.

Temporary spare tire and wheel

Item

Specification
Wheel
Size
16 × 5J
17× 4T
Inset
(mm {in})
40 {1.6}
35 {1.4}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Material
Steel
Tire
Size
185/55R16 87M
T125/70R17 98M
T135/80D17 103M
Air pressure
(kPa {bar <psi>})
320 {3.2, <46>}
420 <60>
Remaining tread
(mm {in})
1.6 {0.063} min.
Wheel and tire
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
108—147 {12—14, 80—108}