REAR WHEEL HUB BOLT REPLACEMENT

id031200800200

1.  Switch the ignition ON (engine off).

2.  Release the electric parking brake.

3.  Switch the ignition off.

4.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

5.  Remove the wheel and tire. (See WHEEL AND TIRE REMOVAL/INSTALLATION.)

6.  Disconnect the electric parking brake motor gear unit connector. (See ELECTRIC PARKING BRAKE MOTOR GEAR UNIT REMOVAL/INSTALLATION.)

7.  Remove the rear brake caliper component installation bolts.

am6xuw00011516

8.  Remove the rear brake caliper component and suspend it out of the way using a cable.

ac9uuw00008034

9.  Remove the rear disc plate.

am6xuw00011517

10.  Remove the wheel hub bolt using the SST as shown in the figure.

ac5jjw00003212

11.  Place a new wheel hub bolt in the wheel hub.

12.  Install the wheel hub by placing a proper sized washer on the hub, and tightening the nut as shown in the figure.

am3uuw00006182