NO.8 MASTER WARNING LIGHT STAY ON AND A MESSAGE "SCBS Inspection Required" IS INDICATED IN THE DISPLAY [DYNAMIC STABILITY CONTROL (DSC)]

id0403b2860700

8

Master warning light*1 stay on and a message “SCBS Inspection Required” is indicated in the display*2
POSSIBLE CAUSE
•  Forward sensing camera (FSC) detects a malfunction.
•  DSC HU/CM internal malfunction.
•  DSC HU/CM detected malfunction (input and output device malfunction).
•  PCM and/or instrument cluster detect a malfunction.
•  Instrument cluster malfunction.

*1  :Vehicle without multi-information display.
*2  :Vehicle with multi-information display.

Diagnostic procedure

STEP

INSPECTION

ACTION
1
CONFIRM FORWARD SENSING CAMERA (FSC) DTC
•  Retrieve the forward sensing camera (FSC) DTC using the M-MDS.
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [FORWARD SENSING CAMERA (FSC)].)
No
Go to the next step.
2
CONFIRM DSC HU/CM DTC
•  Retrieve the DSC HU/CM DTC using the M-MDS.
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)].)
No
Go to the next step.
3
CONFIRM PCM DTC
•  Retrieve the PCM DTC using the M-MDS.
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [PCM (SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION))].)
(See DTC TABLE [PCM (SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT CYLINDER DEACTIVATION))].)
(See DTC TABLE [PCM (SKYACTIV-G 2.5T)].)
(See DTC TABLE [PCM (SKYACTIV-D 2.2)].)
No
Go to the next step.
4
CONFIRM INSTRUMENT CLUSTER DTC
•  Retrieve the instrument cluster DTC using the M-MDS.
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [INSTRUMENT CLUSTER].)
No
Replace the instrument cluster.
(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)