NO.1 ELECTRIC POWER STEERING (EPS) WARNING LIGHT DOES NOT ILLUMINATE WITH IGNITION SWITCHED ON [ELECTRIC POWER STEERING (EPS)]


id0603a2950600

1

Electric power steering (EPS) warning light does not illuminate with ignition switched ON.*1

TROUBLESHOOTING HINTS
•  EPS warning light circuit malfunction in the instrument cluster.
•  An error originates from the EPS control module, and the off signal is generated.
―  EPS control module malfunction

*1  :Without multi-information display

Diagnostic Procedure

STEP

INSPECTION

ACTION

1
•  Turn on the EPS warning light at instrument cluster using the “WL+IL” of the M-MDS active command modes function.
•  Is the EPS warning light illuminated?
Yes
EPS control module malfunction. Replace the EPS control module.
No
Perform the instrument cluster configuration, then repeat the inspection from Step 1.
•  If the malfunction recurs, replace the instrument cluster.