PID/DATA MONITOR TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)]

• The SRS air bag system can be identified by whether or not the seat track position sensor is present.

― Standard deployment control system: Without seat track position sensor

― Two-step deployment control system: With seat track position sensor

PID name (definition)	Unit/Operation	Operation Status (Reference)
AB_WL (Air bag system warning light status)	Lamp_Off/Lamp_On/Plant_Mode/Unknown	• Air bag system warning light off: Lamp_Off • Air bag system warning light on: Lamp_On • Air bag system warning light flashing: Plant_Mode • Air bag system warning light status unrecognized: Unknown
P_SEAT_M_S (Occupancy sensor)	Off/On	• Not occupant seated in passenger-side front seat: Off • Occupant seated in passenger-side front seat: On
RES_C_AB_D (Driver-side curtain air bag module resistance nominal)	ohm	Continuous: 0.81–6.42 ohms
RES_C_AB_P (Passenger-side curtain air bag module resistance nominal)	ohm	Continuous: 0.81–6.42 ohms
RES_F_AB1_D (Driver-side air bag module (inflator No.1) resistance nominal)	ohm	Continuous: 0.99–6.42 ohms
RES_F_AB1_P (Passenger-side air bag module (inflator No.1) resistance nominal)	ohm	Continuous: 0.81–6.42 ohms
RES_PCD_BAR (Poorly connected detector bar terminals resistance nominal (all of SAS control module connectors))	ohm	• Normal connected: 100 ohm or less • Poor connected: 10 kilohm or more
RES_S_AB_D (Driver-side side air bag module resistance nominal)	ohm	Continuous: 0.81–9.85 ohms
RES_S_AB_P (Passenger-side side air bag module resistance nominal)	ohm	Continuous: 0.81–9.85 ohms
RES_SB_P_D (Driver-side pre-tensioner seat belt resistance nominal)	ohm	Continuous: 0.81–6.42 ohms
RES_SB_P_P (Passenger-side pre-tensioner seat belt resistance nominal)	ohm	Continuous: 0.81–6.42 ohms
SEAT_B_D (Driver-side buckle switch status)	Unbuckled/Buckled	• Driver-side front seat belt fastened (Driver-side buckle switch off): Buckled • Driver-side front seat belt not fastened (Driver-side buckle switch on): Unbuckled
SEAT_B_P (Passenger-side buckle switch status)	Unbuckled/Buckled	Occupant seated in passenger-side front seat: On	• Passenger-side front seat belt fastened (Passenger-side buckle switch off): Buckled • Passenger-side front seat belt not fastened (Passenger-side buckle switch on): Unbuckled
VPWR_IGA (SAS control module power voltage)	V	Ignition switch is at ON: IG1 voltage

PID name (definition)

Unit/Operation

Operation Status (Reference)

AB_WL

(Air bag system warning light status)

Lamp_Off/Lamp_On/Plant_Mode/Unknown

• Air bag system warning light off: Lamp_Off

• Air bag system warning light on: Lamp_On

• Air bag system warning light flashing: Plant_Mode

• Air bag system warning light status unrecognized: Unknown

P_SEAT_M_S

(Occupancy sensor)

Off/On

• Not occupant seated in passenger-side front seat: Off

• Occupant seated in passenger-side front seat: On

RES_C_AB_D

(Driver-side curtain air bag module resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_C_AB_P

(Passenger-side curtain air bag module resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_F_AB1_D

(Driver-side air bag module (inflator No.1) resistance nominal)

ohm

Continuous: 0.99–6.42 ohms

RES_F_AB1_P

(Passenger-side air bag module (inflator No.1) resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_PCD_BAR

(Poorly connected detector bar terminals resistance nominal (all of SAS control module connectors))

ohm

• Normal connected: 100 ohm or less

• Poor connected: 10 kilohm or more

RES_S_AB_D

(Driver-side side air bag module resistance nominal)

ohm

Continuous: 0.81–9.85 ohms

RES_S_AB_P

(Passenger-side side air bag module resistance nominal)

ohm

Continuous: 0.81–9.85 ohms

RES_SB_P_D

(Driver-side pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

RES_SB_P_P

(Passenger-side pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.81–6.42 ohms

SEAT_B_D

(Driver-side buckle switch status)

Unbuckled/Buckled

• Driver-side front seat belt fastened (Driver-side buckle switch off): Buckled

• Driver-side front seat belt not fastened (Driver-side buckle switch on): Unbuckled

SEAT_B_P

(Passenger-side buckle switch status)

Unbuckled/Buckled

Occupant seated in passenger-side front seat: On

• Passenger-side front seat belt fastened (Passenger-side buckle switch off): Buckled

• Passenger-side front seat belt not fastened (Passenger-side buckle switch on): Unbuckled

VPWR_IGA

(SAS control module power voltage)

Ignition switch is at ON: IG1 voltage