DTC B1193:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)]

id0802g8822000

Note

•  The SRS air bag system can be identified by whether or not the seat track position sensor is present.

―  Standard deployment control system: Without seat track position sensor

―  Two-step deployment control system: With seat track position sensor

System malfunction location	•  SAS control module operation (deployment)
Detection condition	Warning •  Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. •  SAS control module operates (deploys) (air bag module or pre-tensioner seat belt)
Fail-safe	Not applicable
Possible cause	•  SAS control module operation (deployment) •  SAS control module malfunction
System wiring diagram	Not applicable

Diagnostic Procedure

ACTION
•  Replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM].)