DTC B1429:00 [SAS CONTROL MODULE (ACTIVE BONNET)]

id0802h4007400

System malfunction location
•  SAS control module operation (deployment)
Detection condition
Warning
•  Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
•  SAS control module completed he recording of the collision data after the active bonnet actuators operated (deployed)
Fail-safe
—
Possible cause
•  Active bonnet actuator operation (deployment)
•  SAS control module malfunction
System wiring diagram
—


Diagnostic Procedure

ACTION
•  Replace the SAS control module.