PID/DATA MONITOR TABLE [SAS CONTROL MODULE (ACTIVE BONNET)]

id0802h4081000

PID

Unit/Condition

Data contents

SAS control module terminal

PCD_A

(Poorly connected detector bar terminal voltage nominal (SAS control module connector A))

V

•  Normal connected: 0.27 V or less

•  Poor connected: 3.17 V or more

1a, 1b

PCD_B

(Poorly connected detector bar terminal voltage nominal (SAS control module connector B))

V

•  Normal connected: 0.27 V or less

•  Poor connected: 3.17 V or more

2a, 2b

PCD_C

(Poorly connected detector bar terminal voltage nominal (SAS control module connector C))

V

•  Normal connected: 0.27 V or less

•  Poor connected: 3.17 V or more

3a, 3b

RES_ACTU1

(Active bonnet actuator (RH) resistance nominal)

ohm

Continuous: 0.88–10.53 ohms

1U, 1W

RES_ACTU2

(Active bonnet actuator (LH) resistance nominal)

ohm

Continuous: 0.88–10.53 ohms

1Z, 1AA

VPWR_IGA

(SAS control module power voltage)

V

Ignition is switched ON: IG1 voltage

2AD

PID	Unit/Condition	Data contents	SAS control module terminal
PCD_A (Poorly connected detector bar terminal voltage nominal (SAS control module connector A))	V	• Normal connected: 0.27 V or less • Poor connected: 3.17 V or more	1a, 1b
PCD_B (Poorly connected detector bar terminal voltage nominal (SAS control module connector B))	V	• Normal connected: 0.27 V or less • Poor connected: 3.17 V or more	2a, 2b
PCD_C (Poorly connected detector bar terminal voltage nominal (SAS control module connector C))	V	• Normal connected: 0.27 V or less • Poor connected: 3.17 V or more	3a, 3b
RES_ACTU1 (Active bonnet actuator (RH) resistance nominal)	ohm	Continuous: 0.88–10.53 ohms	1U, 1W
RES_ACTU2 (Active bonnet actuator (LH) resistance nominal)	ohm	Continuous: 0.88–10.53 ohms	1Z, 1AA
VPWR_IGA (SAS control module power voltage)	V	Ignition is switched ON: IG1 voltage	2AD