DTC B11D4:53 [INSTRUMENT CLUSTER]

id0902e8016100

Description

Forward sensing camera (FSC) malfunction
Detection condition
•  Instrument cluster detects the following malfunctions:
―  Forward sensing camera (FSC) malfunction
―  Malfunction in smart city brake support related system (forward sensing camera (FSC), DSC HU/CM, PCM)
Fail-safe
•  Inhibits the smart city brake support control.
•  Warning message related to the smart city brake support is displayed in the TFT LCD display.
Possible cause
•  System related to the smart city brake support stores DTCs.
•  Forward sensing camera (FSC) malfunction
System wiring diagram
Not applicable

Diagnostic Procedure

Step

Inspection

Action
1
VERIFY ALL SYSTEM DTCs
•  Switch the ignition to off.
•  Switch the ignition ON (engine off or on) and wait for 10 s or more.
•  Perform a CMDTC self-test using the M-MDS.
•  Are any DTCs other than DTC B11D4:53?
Yes
Repair the malfunctioning part according to the applicable system DTC troubleshooting.
No
Go to the next step.
2
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
•  Clear DTC for the instrument cluster using the M-MDS.
•  Switch the ignition ON (engine off or on) and wait for 10 s or more.
•  Perform a CMDTC self-test using the M-MDS.
•  Is the same Pending DTC present?
Yes
Replace the forward sensing camera (FSC), then go to the next step.
(See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION.)
No
Go to the next step.
3
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Yes
Repair the malfunctioning part according to the applicable system DTC troubleshooting.
(See DTC TABLE [INSTRUMENT CLUSTER].)
No
DTC troubleshooting completed.