LIGHTING SYSTEM PERSONALIZATION

id091800013300

Caution

• The personalization feature may not be set correctly if [Not Adopted.] or [Not equipped] is selected in the setting displayed on the Mazda Modular Diagnostic System (M-MDS). Do not select [Not Adopted.] or [Not equipped] in the setting displayed on the Mazda Modular Diagnostic System (M-MDS).

Note

• Settings of some personalization features displayed on the Mazda Modular Diagnostic System (M-MDS) cannot be changed depending on the vehicle specification.

• A personalization function has been adopted with which settings for each function can be changed.

• The setting for each function can be switched using the Mazda Modular Diagnostic System (M-MDS) or the center display (with center display). Refer to the workshop manual for the detailed setting procedure.

Turn Light System

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Three-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

ON or OFF^*1

OFF/ON

Rear body control module (RBCM)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control module
Three-Flash Turn Signal	The turn light system can be switched between operable and inoperable.	ON or OFF^*1	OFF/ON	Rear body control module (RBCM)

Using center display

Display of center display

Function

Initial setting

Setting contents

Control module

3-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

On or Off^*1

On/Off

Rear body control module (RBCM)

Reset

Returns the setting content of the turn light system to the initial setting.

No

No/Yes

Rear body control module (RBCM)

Display of center display	Function	Initial setting	Setting contents	Control module
3-Flash Turn Signal	The turn light system can be switched between operable and inoperable.	On or Off^*1	On/Off	Rear body control module (RBCM)
Reset	Returns the setting content of the turn light system to the initial setting.	No	No/Yes	Rear body control module (RBCM)

*1 :The initial value differs depending on the market.

Auto Light System

Note

• If the mode is set to [Light] and [Medium Light], the illuminance level for turning on the headlight LO, TNS (parking lights) , and panel light increases. Therefore, each light turns on when the ambient light is brighter than when the level is set to [Medium]. In addition, if the mode is set to [Dark] or [Medium Dark], the illuminance level for turning on the headlight LO, TNS (parking lights) , and panel light decreases. Therefore, each light turns on when the ambient light is darker than when the level is set to [Medium].

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Auto-headlight On.

Auto light sensor sensitivity can be changed.

Medium

Dark/Medium Dark/Medium/Medium Light/Light

Rear body control module (RBCM)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control module
Auto-headlight On.	Auto light sensor sensitivity can be changed.	Medium	Dark/Medium Dark/Medium/Medium Light/Light	Rear body control module (RBCM)

Using center display

Display of center display

Function

Initial setting

Setting contents

Control module

Auto Headlight On

Auto light sensor sensitivity can be changed.

Medium

Light/Medium Light/Medium/Medium Dark/Dark

Rear body control module (RBCM)

Reset

Returns the setting content of the lighting system to the initial setting.

No

No/Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  Forward sensing camera (FSC)

•  Instrument cluster

•  Adaptive LED headlights control module

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Setting contents	Control module
Auto Headlight On	Auto light sensor sensitivity can be changed.	Medium	Light/Medium Light/Medium/Medium Dark/Dark	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No/Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module • Adaptive front lighting system (AFS) control module

Coming Home Light

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Coming Home Light operation time

The coming home light operation time can be switched.

30 seconds.

0 seconds./30 seconds./60 seconds./90 seconds. /120 seconds.

Rear body control module (RBCM)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control module
Coming Home Light operation time	The coming home light operation time can be switched.	30 seconds.	0 seconds./30 seconds./60 seconds./90 seconds. /120 seconds.	Rear body control module (RBCM)

Using center display

Display of center display

Function

Initial setting

Setting contents

Control module

Coming Home Lights Timer

The coming home light operation time can be switched.

30 seconds

Off/30 seconds/60 seconds/90 seconds/120 seconds

Rear body control module (RBCM)

Reset

Returns the setting content of the lighting system to the initial setting.

No

No/Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  Forward sensing camera (FSC)

•  Instrument cluster

•  Adaptive LED headlights control module

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Setting contents	Control module
Coming Home Lights Timer	The coming home light operation time can be switched.	30 seconds	Off/30 seconds/60 seconds/90 seconds/120 seconds	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No/Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module • Adaptive front lighting system (AFS) control module

Leaving Home Light

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Leaving Home Light system

The leaving home light can be switched between operable and inoperable.

On or Off^*1

Off/On

Rear body control module (RBCM)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control module
Leaving Home Light system	The leaving home light can be switched between operable and inoperable.	On or Off^*1	Off/On	Rear body control module (RBCM)

Using center display

Display of center display

Function

Initial setting

Setting contents

Control module

Leaving Home Lights

The leaving home light can be switched between operable and inoperable.

On or Off^*1

On/Off

Rear body control module (RBCM)

Reset

Returns the setting content of the lighting system to the initial setting.

No

No/Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  Forward sensing camera (FSC)

•  Instrument cluster

•  Adaptive LED headlights control module

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Setting contents	Control module
Leaving Home Lights	The leaving home light can be switched between operable and inoperable.	On or Off^*1	On/Off	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No/Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module • Adaptive front lighting system (AFS) control module

*1 :The initial value differs depending on the market.

Room Light Control System

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module

Interior Light Timeout - Door Open.

•  The front/rear map light and courtesy light illumination time after any door is opened can be changed.

4SD

•  The trunk compartment light illumination time after the trunk lid is opened can be changed.

WGN

•  The cargo compartment light illumination time after the liftgate is opened can be changed.

30 minutes.

30 minutes./60 minutes./10 minutes.

Rear body control module (RBCM)

Interior Light Timeout - Door Closed.

The front/rear map light and courtesy light illumination time after all the doors are closed can be changed.

15 seconds.

15 seconds./7.5 seconds./30 seconds./60 seconds.

Rear body control module (RBCM)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control module
Interior Light Timeout - Door Open.	• The front/rear map light and courtesy light illumination time after any door is opened can be changed. 4SD • The trunk compartment light illumination time after the trunk lid is opened can be changed. WGN • The cargo compartment light illumination time after the liftgate is opened can be changed.	30 minutes.	30 minutes./60 minutes./10 minutes.	Rear body control module (RBCM)
Interior Light Timeout - Door Closed.	The front/rear map light and courtesy light illumination time after all the doors are closed can be changed.	15 seconds.	15 seconds./7.5 seconds./30 seconds./60 seconds.	Rear body control module (RBCM)

Using center display

Display of center display

Function

Initial setting

Setting contents

Control module

Interior Light Timeout - Doors Open

•  The front/rear map light illumination time after any door is opened can be changed.

•  The trunk compartment light (4SD)/cargo compartment light (WGN) illumination time after the trunk lid (4SD)/liftgate (WGN) is opened can be changed.

30 minutes

60 minutes/30 minutes/10 minutes

Rear body control module (RBCM)

Interior Light Timeout - Doors Closed

The front/rear map light illumination time after all the doors are closed can be changed.

15 seconds

60 seconds/30 seconds/15 seconds/7.5 seconds

Rear body control module (RBCM)

Interior Lightning Brightness

The down light brightness can be changed when the TNS (parking lights) are turned on.

Medium

Bright/Medium/Dark/Off

Rear body control module (RBCM)

Reset

Returns the setting content of the lighting system to the initial setting.

No

No/Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  Forward sensing camera (FSC)

•  Instrument cluster

•  Adaptive LED headlights control module

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Setting contents	Control module
Interior Light Timeout - Doors Open	• The front/rear map light illumination time after any door is opened can be changed. • The trunk compartment light (4SD)/cargo compartment light (WGN) illumination time after the trunk lid (4SD)/liftgate (WGN) is opened can be changed.	30 minutes	60 minutes/30 minutes/10 minutes	Rear body control module (RBCM)
Interior Light Timeout - Doors Closed	The front/rear map light illumination time after all the doors are closed can be changed.	15 seconds	60 seconds/30 seconds/15 seconds/7.5 seconds	Rear body control module (RBCM)
Interior Lightning Brightness	The down light brightness can be changed when the TNS (parking lights) are turned on.	Medium	Bright/Medium/Dark/Off	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No/Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module • Adaptive front lighting system (AFS) control module

Running Light System (Australian Specs. and General Specs.)

Using light switch

Note

• Refer to the workshop manual for the detailed setting procedure.

Function

Initial setting

Setting contents

Control module

The running light system function can be set.

On (Running light illumination)

Off (Running light non-illumination)/On (Running light illumination)

Front body control module (FBCM)