TORQUE BOX REMOVAL [PANEL REPLACEMENT]

id098008607100

Symbol Mark

am6zzb00000366

Removal Procedure

1.  Drill the spot welds in area A (LH: 26 locations, RH: 22 locations) shown in the figure.

Note

•  When drilling the spot welds in area A (LH: 26 locations, RH: 22 locations) shown in the figure, do not drill through-holes in consideration of the workability when installing.

am6xub00000265

2.  Drill the spot welds in the 7 locations in area B show in the figure from the interior

am6xub00000298

3.  Remove the torque box.