REAR FENDER PANEL REMOVAL [PANEL REPLACEMENT]

id098008744900

Symbol Mark

am6zzb00000411

Removal Procedure

4SD

Caution

•   If cutting work is done using flame, a fire could occur because insulators are inserted in the locations shown in the figure. When performing the cutting work near the insulator insert areas, avoid using flame and use an air saw or drill.

am6zzb00000902

1.  Rough cut the 2 locations in area A shown in the figure.

2.  Drill the spot welds in the 62 locations in area B shown in the figure.

am6zzb00000862

3.  Drill the spot welds in the 27 locations in area C shown in the figure.

am6zzb00000736

4.  Remove the cabin side frame (outer) (rear fender panel).

WGN

Caution

•   If cutting work is done using flame, a fire could occur because insulators are inserted in the locations shown in the figure. When performing the cutting work near the insulator insert areas, avoid using flame and use an air saw or drill.

am6zzb00000903

1.  Rough cut the 3 locations in area A shown in the figure.

2.  Drill the spot welds in the 73 locations in area B shown in the figure.

am6zzb00000737

3.  Drill the spot welds in the 16 locations in area C shown in the figure.

am6zzb00000738

4.  Remove the cabin side frame (outer) (rear fender panel).