SHROUD SIDE MEMBER INSTALLATION [PANEL REPLACEMENT]

id098008919100

Symbol Mark

am6zzb00000326

Installation Procedure

1.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2.  Drill holes for the plug welding before installing the new parts.

3.  After temporarily installing new parts, make sure the related parts fit properly.

4.  Plug welds in the 7 locations in area A shown in the figure.

5.  Plug welds in the 3 locations in area B shown in the figure and install the shroud side member.

am6zzb00000722