SIDE MEMBER REMOVAL [PANEL REPLACEMENT]

id098008928100

Symbol Mark

am6zzb00000371

Removal Procedure

1.  Drill the spot welds in area A (LH: 34 locations, RH: 33 locations) shown in the figure

2.  Drill the spot welds in the 10 locations in area B shown in the figure.

Note

•  When drilling the spot welds in the 10 locations in area B shown in the figure, do not drill through-holes in consideration of the workability when installing

am6xub00000267

3.  Remove the side member.