NO.3 i-stop INDICATOR LIGHT (GREEN) FLASHES [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)]

NO.3 i-stop INDICATOR LIGHT (GREEN) FLASHES [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)]

id1103b3000800

3

i-stop INDICATOR LIGHT (GREEN) FLASHES

DESCRIPTION

• i-stop indicator light (green) remains flashing during i-stop.

POSSIBLE CAUSE

• i-stop operation conditions are not met.

Diagnostic Procedure

STEP	INSPECTION	RESULTS	ACTION
1	VERIFY DTC • Retrieve the PCM, DSC HU/CM and instrument cluster DTCs using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION))].) (See DTC INSPECTION [DYNAMIC STABILITY CONTROL (DSC)].) (See DTC INSPECTION [INSTRUMENT CLUSTER].) • Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [PCM (SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION))].) (See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)].) (See DTC TABLE [INSTRUMENT CLUSTER].)
1		No	Go to the next step.
2	Verify the test results. • If normal, return to the diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)].) • If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis. ― If the vehicle is repaired, troubleshooting is completed. ― If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION)].)