|
2
|
Connect the WDS or equivalent to the DLC-2.
Turn the ignition switch to the ON position (Engine off).
Retrieve any DTCs.
Are there any DTCs displayed?
|
Yes
|
DTC is displayed:
Go to appropriate DTC test.
|
|
3
|
Verify test results.
• If normal, return to the diagnostic index to service any additional symptoms.
• If a malfunction remains, inspect the related Service Bulletins and/or On-line Repair Information and perform the repair or diagnosis.
-
- If the vehicle is repaired, troubleshooting is completed.
-
- If the vehicle is not repaired or additional diagnostic information is not available, reprogram the PCM if a later calibration is available. Retest.le. Retest.
|