DRIVE BELT CONSTRUCTION [L8, LF, L3]

id0110a1102500

• A serpentine type drive belt with a V-ribbed belt to drive the supplemental units has been adopted. This shortens the engine length and improves serviceability.

• A front drive belt auto tensioner with an embedded coil spring has been adopted to automatically maintain the optimal drive belt tension.

Drive Belt Specification.


ITEM		L8	LF	L3
Belt length size	mm {in}	About 2,260 {88.98} (About 2,163 {85.16})		About 2,310 {90.94}
Belt width size	mm {in}	About 20.5 {0.81}

( ) is A/C non-equipping vehicle specification.


1	P/S oil pump pulley
2	Drive belt
3	Idler pulley
4	Generator pulley
5	Front drive belt auto tensioner
6	Crankshaft pulley
7	A/C compressor pulley
8	Water pump pulley