1. Remove the engine from the transaxle. (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [A26MX-R].)
2. Remove the intake-air system. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION [L3 Turbo].)
3. Remove the exhaust system. (See EXHAUST SYSTEM REMOVAL/INSTALLATION [L3 Turbo].)
4. Remove the generator. (See GENERATOR REMOVAL/INSTALLATION [L3 Turbo].)
5. Remove the starter. (See STARTER REMOVAL/INSTALLATION [L3 Turbo].)
6. Remove the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [L3 Turbo].)
7. Install in the reverse order of removal.