OIL FILTER CONSTRUCTION [L8, LF, L3, L3 Turbo]
id0111b2100800
• The oil filter component is installed on the left surface (vehicle front) of the cylinder block.
• An aluminum oil filter adapter has been adopted for weight reduction. The oil pressure switch and oil cooler are installed on the oil filter adapter.
Cartridge Type
Oil filter specification
|
Item
|
Specification (mm {in})
|
|
Outer diameter
|
|
65.2-65.8 {2.57-2.59}
|
|
Height
|
|
72.6-74.4 {2.86-2.92}
|
• A resin oil filter cover has been adopted for weight reduction. A drain plug has been installed on the bottom of the oil filter cover to improve replacement serviceability.
• An environment-friendly oil filter made of incinerable polyester has been adopted. Only the filter paper needs to be replaced.
.
|
1
|
External view, With oil cooler
|
|
2
|
Oil cooler
|
|
3
|
Gasket
|
|
4
|
Oil pressure switch
|
|
5
|
Oil filter adapter
|
|
6
|
Oil filter
|
|
7
|
Oil filter cover
|
|
8
|
O-ring
|
|
9
|
Oil filter drain plug
|
|
10
|
External view, Without oil cooler
|
|
11
|
Sectional view
|
|
12
|
Bypass valve
|
|
13
|
Oil passage
|
|
14
|
Normal
|
|
15
|
Bypass
|
|
16
|
Spring
|
|
17
|
Oil pressure
|
Spin-on Type
• The oil filter is a full-flow paper element type with an outer diameter of 76.2 mm {3.00 in} and height of 94.0 mm {3.70 in}.
.
|
1
|
External view, With oil cooler
|
|
2
|
Oil cooler
|
|
3
|
Gasket
|
|
4
|
Oil pressure switch
|
|
5
|
Oil filter adapter
|
|
6
|
Oil filter
|
|
7
|
External view, Without oil cooler
|
|
8
|
Outer diameter
|
|
9
|
Height
|