ENGINE CONTROL SYSTEM BLOCK DIAGRAM [L3 Turbo]

id0140b6100500

g6e140btl001

1	MAF/IAT sensor
2	TP sensor No.1, No.2
3	MAP sensor
4	CMP sensor
5	CKP sensor
6	ECT sensor
7	A/F sensor
8	HO2S
9	Vehicle speed signal
10	CPP switch
11	Neutral switch
12	Brake switch
13	Refrigerant pressure switch (Low pressure switch, high pressure switch)
14	Refrigerant pressure switch (Medium-pressure switch)
15	Generator (Terminal P: starter coil)
16	Battery
17	BARO sensor
18	Instrument cluster (CAN signal)
19	APP sensor No.1, No.2
20	Fuel pressure sensor
21	Boost air temperature sensor
22	Cruise control switch
23	Ignition switch
24	Electronic throttle control
25	Variable swirl control
26	Fuel injection control
27	Fuel pump control
28	Electronic spark advance (ESA) control
29	Purge control
30	EGR control
31	A/F sensor heater control
32	HO2S heater control
33	A/C cut-off control
34	Electrical fan control
35	Generator control
36	Starter cut-off control
37	Variable valve timing control
38	High pressure fuel pump control
39	Wastegate control
40	Fuel pump speed control
41	Throttle actuator
42	Throttle valve relay
43	Variable swirl shutter valve actuator
44	Injector driver module
45	Fuel pump relay
46	Ignition coil
47	Purge solenoid valve
48	EGR valve
49	A/F sensor heater
50	HO2S heater
51	A/C relay
52	Fan control module
53	Generator (Terminal D: field coil)
54	Starter relay
55	ABS HU/CM (With ABS) (CAN signal)
56	Instrument cluster (CAN signal)
57	Spill valve control solenoid valve
58	Wastegate control solenoid valve
59	Fuel pump speed control relay