TRANSMISSION/TRANSAXLE SPECIFICATIONS


Item			Specifications
Manual transaxle type			G35M-R	G66M-R	A26M-R	A26MX-R
Clutch control			Hydraulic
Clutch cover	Spring type		Diaphragm
Clutch cover	Set load	(N {kgf, lbf})	5,200 {531, 1,169}	6,000 {611, 1,350}	10,100 {1,030, 2,271}
Clutch disc	Outer diameter	(mm {in})	215 {8.46}		250 {9.84}
Clutch disc	Inner diameter	(mm {in})	150 {5.91}		150 {6.10}
Clutch pedal	Type		Suspended
	Pedal ratio		6.6
	Full stroke	(mm {in})	140 {5.51}
Clutch master cylinder inner diameter		(mm {in})	15.87 {0.625}
Clutch release cylinder inner diameter		(mm {in})	19.05 {0.750}
Clutch fluid type			SAE J1703, FMVSS 116 DOT-3 or DOT-4

Manual Transaxle [G35M-R]


Item			Specifications
Engine type			L8
Manual transaxle type			G35M-R
Operation system			Cable
Transaxle control			Floor-shift
Shift assist	Forward		Synchromesh
Shift assist	Reverse		Selective sliding and synchromesh
Gear ratio	1GR		3.666
	2GR		2.059
	3GR		1.392
	4GR		0.970
	5GR		0.755
	Reverse		3.166
Final gear ratio			4.388
Oil	Grade		API service GL-4 or GL-5
	Viscosity	All season	SAE 75W-90
	Viscosity	Above 10 °C {50 °F}	SAE 80W-90
	Capacity (approx. quantity)	(L {US qt, Imp qt})	2.87 {3.03, 2.53}

Manual Transaxle [G66M-R]

Manual Transaxle [A26M-R, A26MX-R]

Automatic Transaxle [FS5A-EL]


Item			Specification
Engine type			LF	L3
Automatic transaxle type			FS5A-EL
Gear ratio		1GR	3.620
		2GR	1.925
		3GR	1.285
		4GR	0.933
		5GR	0.692
		Reverse	3.405
Final gear ratio			3.863
ATF	Type		ATF M-V
ATF	Capacity (Approx. quantity)	(L {US qt, lmp qt})	8.14 {8.60, 7.16}
Torque converter stall torque ratio			2.07	1.84
Hydraulic system (Number of drive/driven gear plates)	Forward clutch		4/4
	3-4 clutch		3/3
	Reverse clutch		2/2
	Direct clutch		2/3
	Low and reverse brake		5/5
	Reduction brake		3/5
Band servo	Servo diameter (Piston outer dia.)	(mm {in})	64.6 {2.54}
Front planetary gear (Number of teeth)	Front sun gear		49
	Front pinion gear		20
	Front internal gear		89
Rear planetary gear (Number of teeth)	Rear sun gear		37
	Rear pinion gear		30
	Rear internal gear		98
Primary gear (number of teeth)			86
Secondary gear (number of teeth)			82
Secondary planetary gear (Number of teeth)	Secondary sun gear		31
	Secondary pinion gear		29
	Secondary internal gear		89
Output gear (number of teeth)			22
Ring gear (number of teeth)			85

Automatic Transaxle [JA5AX-EL]


Item		Specification
Transaxle type		JA5AX-EL
Gear ratio	1GR	3.801
	2GR	2.131
	3GR	1.364
	4GR	0.935
	5GR (O/D)	0.685
	Reverse	2.970
Final gear ratio		3.712
ATF	Type	ATF M-III or equivalent (e.g. Dexron^®III)
ATF	Capacity (approximate quantity) (L {US qt, Imp qt})	8.3 {8.8, 7.3}
Torque converter stall torque ratio		1.750:1
Hydraulic system (Number of drive/driven plates)	Low clutch	6/6
	2-4 brake	3/2
	High clutch	5/5
	Direct clutch	3/5
	Reverse clutch	2/2
	Low and reverse brake	6/5
Band servo (mm {in})	Reduction accumulator piston outer dia./reduction band servo piston outer dia.	49.66/57.64
Number of front planetary gear teeth	Ring gear	74
	Sun gear	34
	Pinion gear	20
Number of rear planetary gear teeth	Ring gear	75
	Sun gear	42
	Pinion gear	17
Number of reduction planetary gear teeth	Ring gear	85
	Sun gear	31
	Pinion gear	27
Number of output gear teeth		41
Number of idler gear teeth		47
Number of reduction gear teeth		22
Number of ring gear teeth		67

Clutch