NO.27 GEAR POSITION INDICATOR LIGHT DOES NOT ILLUMINATE IN M RANGE [FS5A-EL]


27	Gear position indicator light does not illuminate in M range
DESCRIPTION	• Gear position indicator light in instrument cluster does not illuminate in M range with the ignition switch at ON.
POSSIBLE CAUSE	• M range switch, gear position indicator light or related wiring harness malfunction Note • Before following the troubleshooting steps, make sure that the Automatic Transaxle ON-Board Diagnostic and Automatic Transaxle Basic Inspection are conducted.


STEP	INSPECTION		ACTION
1	Do other indicator lights illuminate with the ignition switch at ON?	Yes	Go to the next step.
1		No	Inspect the meter fuse.
2	Inspect the MNL SW PID value using the WDS or equivalent. Is the MNL SW PID value normal?	Yes	Inspect the instrument cluster.
2		No	Inspect the M range switch. If the M range switch is normal, inspect for continuity between the M range switch and TCM terminal 2B.
3	• Verify the test results. - If normal, return to the diagnostic index to service any additional symptoms. - If the malfunction remains, inspect the related Service information and perform repair or diagnosis. • If the vehicle is repaired, troubleshooting is completed. • If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM.