|
PID name (definition)
|
Unit/condition
|
Condition/specification
|
terminal
|
|
CONT_RCM
(Number of continuous DTC)
|
-
|
• DTC is detected: 1-255
• DTC is not detected: 0
|
-
|
|
CRSH_ST_D1
(Driver-side air bag sensor communication state)
|
OK/
FAULT
|
• Sensor normal: OK
• Sensor communication error: FAULT
|
2Z, 2AA
|
|
CRSH_ST_D2
(Driver-side air bag sensor circuit state)
|
OK/
FAULT
|
• Sensor normal: OK
• Sensor internal circuit error: FAULT
|
2Z, 2AA
|
|
CRSH_ST_P1
(Passenger-side air bag sensor communication state)
|
OK/
FAULT
|
• Sensor normal: OK
• Sensor communication error: FAULT
|
2B, 2C
|
|
CRSH_ST_P2
(Passenger-side air bag sensor circuit state)
|
OK/
FAULT
|
• Sensor normal: OK
• Sensor internal circuit error: FAULT
|
2B, 2C
|
|
D_PTENSFLT
(Driver-side pre-tensioner seat belt circuit state)
|
SQ_LOWRES
OPEN
SHRT_B+
SHRT_GND
Normal
|
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness circuit open: OPEN
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness normal: Normal
|
2P, 2S
|
|
DABAGR
(Driver-side air bag module resistance)
|
ohm
|
Under any condition: 1.5-3.7 ohm
|
1S, 1V
|
|
DR_CURTN
(Driver-side curtain air bag module resistance)
|
ohm
|
Under any condition: 1.4-3.2 ohm
|
2Y, 2V
|
|
DR_PTENS
(Driver-side pre-tensioner seat belt resistance)
|
ohm
|
Under any condition: 1.5-3.1 ohm
|
2P, 2S
|
|
DS_AB
(Driver-side side air bag module resistance)
|
ohm
|
Under any condition: 1.4-3.2 ohm
|
2M, 2O
|
|
DS_AB_ST
(Driver-side side air bag module circuit state)
|
SHRT_B+
SHRT_GND
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
2M, 2O
|
|
DS_CURT_ST
(Driver-side curtain air bag module circuit state)
|
SHRT_B+
SHRT_GND
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
2V, 2Y
|
|
DS1_STAT
(Driver-side air bag module circuit state)
|
SHRT_GND
SHRT_B+
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to ground: SHRT GND
• Related wiring harness short to power supply: SHRT B+
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
1S, 1V
|
|
DSB_P_ST
(On demand driver-side pre-tensioner seat belt circuit state)
|
SQ_LOWRES
OPEN
SHRT_B+
SHRT_GND
Normal
|
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness circuit open: OPEN
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness normal: Normal
|
2P, 2S
|
|
I_PAD_SW
(PAD switch status)
|
On/
Off
|
• PAD switch is at PASS AIRBAG ON position: On
• PAD switch is at PASS AIRBAG OFF position: Off
|
1I
|
|
IG_V_2
(System IG1 voltage value)
|
V
|
• Ignition switch to ON position: B+
• Other: 0 V
|
1W
|
|
OD_CRST_D1
(On demand driver-side side air bag sensor communication state)
|
OK/
FAULT
|
• Sensor normal: OK
• Sensor communication error: FAULT
|
2Z, 2AA
|
|
OD_CRST_D2
(On demand driver-side side air bag sensor circuit state)
|
OK/
FAULT
|
• Sensor normal: OK
• Sensor internal circuit error: FAULT
|
2Z, 2AA
|
|
OD_CRST_P1
(On demand passenger-side side air bag sensor communication state)
|
OK/
FAULT
|
• Sensor normal: OK
• Sensor communication error: FAULT
|
2B, 2C
|
|
OD_CRST_P2
(On demand passenger-side side air bag sensor circuit state)
|
OK/
FAULT
|
• Sensor normal: OK
• Sensor internal circuit error: FAULT
|
2B, 2C
|
|
OD_D_CURT
(On demand driver-side curtain air bag module circuit state)
|
SHRT_B+
SHRT_GND
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
2V, 2Y
|
|
OD_DAB1_ST
(On demand driver-side air bag module circuit state)
|
SHRT_GND
SHRT_B+
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
1S, 1V
|
|
OD_DSAB_ST
(On demand driver-side side air bag circuit state)
|
SHRT_B+
SHRT_GND
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
2M, 2O
|
|
OD_P_CURT
(On demand passenger-side curtain air bag module circuit state)
|
SHRT_B+
SHRT_GND
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
2A, 2D
|
|
OD_PAB1_ST
(On demand passenger-side air bag module circuit state)
|
SHRT_GND
SHRT_B+
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
1M, 1P
|
|
OD_PSAB_ST
(On demand passenger-side side air bag sensor circuit state)
|
SHRT_B+
SHRT_GND
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
2I, 2L
|
|
P_PTENSFLT
(Passenger-side pre-tensioner seat belt circuit state)
|
SQ_LOWRES
OPEN
SHRT_B+
SHRT_GND
Normal
|
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness circuit open: OPEN
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness normal: Normal
|
2G, 2J
|
|
PABAGR
(Passenger-side air bag module resistance)
|
ohm
|
Under any condition: 1.4-2.9 ohm
|
1M, 1P
|
|
PS_AB
(Passenger-side side air bag module resistance)
|
ohm
|
Under any condition: 1.4-3.2 ohm
|
2I, 2L
|
|
PS_AB_ST
(Passenger-side side air bag sensor circuit state)
|
SHRT_B+
SHRT_GND
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
2I, 2L
|
|
PS_CURTN
(Passenger-side curtain air bag module resistance)
|
ohm
|
Under any condition: 1.4-3.2 ohm
|
2A, 2D
|
|
PS_CURT_ST
(Passenger-side curtain air bag module circuit state)
|
SHRT_B+
SHRT_GND
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
2A, 2D
|
|
PS_PTENS
(Passenger-side pre-tensioner seat belt resistance)
|
ohm
|
Under any condition: 1.5-3.1 ohm
|
2G, 2J
|
|
PS1_STAT
(Passenger-side air bag module circuit state)
|
SHRT_GND
SHRT_B+
OPEN
SQ_LOWRES
Normal
|
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness circuit open: OPEN
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness normal: Normal
|
1M, 1P
|
|
PSB_P_ST
(On demand passenger-side pre-tensioner seat belt circuit state)
|
SQ_LOWRES
OPEN
SHRT_B+
SHRT_GND
Normal
|
• Air bag module circuit resistance low: SQ_LOWRES
• Related wiring harness circuit open: OPEN
• Related wiring harness short to power supply: SHRT_B+
• Related wiring harness short to ground: SHRT_GND
• Related wiring harness normal: Normal
|
2G, 2J
|