DTC B1017

id080200820000

DTC B1017

Deployment prohibited because configuration is not set

DETECTION CONDITION

Warning
• Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection with only detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
• SAS control module configuration has not been set
POSSIBLE CAUSE
• SAS control module configuration has not been set
• SAS control module malfunction

Diagnostic procedure

INSPECTION

ACTION

CONFIGRATION
• Using the WDS or equivalent, perform SAS control module configuration.
• Is DTC B1017 indicated?
Yes
Replace the SAS control module.
No
DTC troubleshooting completed.