BUCKLE SWITCH INSPECTION

id081100803000

Front Buckle

1. Disconnect the negative battery cable.

2. Disconnect the buckle switch connector.

3. Inspect for continuity between the buckle switch terminals using a tester.

• If not as indicated in the table, replace the front buckle.

Rear Buckle

LH side, center

1. Disconnect the negative battery cable.

2. Disconnect the buckle switch connector.

3. Inspect for continuity between the buckle switch terminals using a tester.

• If not as indicated in the table, replace the front buckle.

RH side

1. Disconnect the negative battery cable.

2. Disconnect the buckle switch connector.

3. Inspect for continuity between the buckle switch terminals using a tester.

• If not as indicated in the table, replace the front buckle.