Applied VIN (assumed):
JMZ GG12***# 100001-190206
JMZ GG14***# 100001-190206
JMZ GY19***# 100001-137241
JMZ GY89***# 100001-137241
1. For MT vehicle, remove the shift lever knob.
2. Slightly bend back the cradle. (with car-navigation system)
3. Remove the cup holder panel using a tape-wrapped screwdriver.
4. Remove the boot panel using a tape-wrapped screwdriver, disconnect the cigarette lighter connector, and remove the front ashtray illumination.
5. Remove the bolts.
6. Install in the reverse order of removal.
Applied VIN (assumed):
JMZ GG12***# 190207-
JMZ GG14***# 190207-
JMZ GY19***# 137242-
JMZ GY89***# 137242-
7. For MT vehicle, remove the shift lever knob.
8. Rotate the wiring harness clip installed on the cradle 90° in the direction indicated by the arrow in the figure and pull it out. (with car-navigation system)
9. Disconnect the cradle connector.
10. Remove the boot panel using a tape-wrapped screwdriver, disconnect the cigarette lighter connector, and remove the front ashtray illumination.
11. Remove the bolts.
12. Install in the reverse order of removal.